FBT Vertus CLA 406.2A

Professional Active Column Array

The Vertus CLA 406.2A comprises four custom 6.5″ inch woofers with 1.5″ voice coils and a 1.4 inch large format Neodymium compression driver with 2.5 inch voice coil with a 100 H x 25 H degree dispersion .The built in amp module delivers 600W for LF section and 300W for HF for 133dB SPL Designed to be used with the CLA 118SA
Made In Italy.

Add to wishlist

Category: Professional Audio

Description
Reviews (0)

KEY FEATURES

Bi-amplified 2-way line array
4 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 degree H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0 degree-20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined by 10 degree to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill

Configuration:

2 Way

Frequency response:

65Hz – 20kHz

Low frequency woofer:

6x 4″ with 1″ VC

High frequency driver:

1x 1.4″ with 2.5″ VC

Maximum SPL cont/peak:

133 dB

Dispersion:

100 x 25

Input impedance:

22kOhm

Crossover frequency:

1.2kHz

Input connector:

XLR with Link Out

Net Dimension (WxHxD):

190 x 1235 x 290mm

Net Weight:

27kg

Transport Dimension (WxHxD):

290 x 1235 x 390mm

Transport Weight:

32kg

AC Power requirements:

640VA

Built-in amplifier LF/HF:

900w (600w LF + 300w HF)

Built-in amplifier peak LF/HF:

1800w (1200w LF + 600w HF)

Power cord:

5m PowerCon True

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

FBT Vertus CLA 406.2A

KEY FEATURES

Reviews

Related products

Login

Register